nANOxd

INstructions

1. Applying Nanopolisher at every during oil changes

• We recommend to use on all engine components:
  • Engine Oil  – 10% of oil volume
  • Transmission – 10% of transmission oil
  • Differential  – 10% of grease volume
• Recommended for all engine components:
  • Manual or automatic transmissions
  • Gasoline or diesel engines.
• For the first time use:
  • Be sure to note the current engine sound and RPM at idle engine.
  • You can also decide apply it, regardless of oil change. However, the oil change allows you to better analyze the oil improvements.
• During regular oil change:
  • First pour the regular oil in the transmission at the regular expected level – do not overfill above the threshold mark.
    • There is no longer need to use premium synthetic oil, since Nanopolisher will reduce the dirt, aging, and loss of oil life.
• Based on the regular oil engine capacity, pour 10% of that volume of Nanopolisher.
• As a best practice fill-up at the full mark. 
• Leave your hood up and turn on the engine.
  • In the course of two minutes:
    • Slowly and steadily apply pressure to the gas pedal, raising the RPM up to 75% of the engine maximum.
    • Remain of for 5 seconds at 75% of RPM maximum
  • In the course of two more minutes:
    • Slowly bring the RPM back down to 50%
    • Slowly bring the RPM back down to 25%
    • Slowly bring the RPM back down to idle.
  • For the first time use:
    • Be sure to notice the new and smother engine sound and lower RPM at idle engine.
• For full PDF material click here

2. Applying Nanopolisher in the Transmissions

• Nanopolisher may be added to either manual or automatic transmissions.
• During transmission oil change, first pour the regular oil in the transmission at the regular expected level – do not overfill above the threshold mark.
• Based on the regular oil capacity, pour 10% of that volume of Nanopolisher.
• For automobile à Pour 3 – 4 oz down the transmission dipstick tube or via the fill plug.

For Class 7,8 (semi) trucks à add 1/2 gallon (1.9 Litter) of Nanopolisher to the transmission

3. Applying Nanopolisher in the Differential

• Nanopolisher may be added to the differential
• During regular oil change, first pour the regular oil in the differential – do not overfill above the threshold mark.
• Based on the regular oil capacity, pour 10% of that volume of Nanopolisher.

4. Apply the Lubricant along with every grease or gear lubrication

• Nanopolisher can be mixed in a 1:9 (10%) ratio into any bearing grease.
• Simply stir the liquid into the grease thoroughly, then apply as usual to the bearing surfaces.