Engine Oil Treatment 4oz / 120ml [For Small Engines, Motorcycles, ATVs, go-karts, lawn mowers]

Description

100% Pure Oil for Engine NanoPolishing and Coating

Recommended Use: Every 4 oil changes or every 60,000 miles

Suitable for:

• Smaller engines requiring up to 1 quart of lubricant oil (e.g., motorcycles, ATVs, go-karts, lawn mowers)
• See below, most common engine sizes and Recommended volume of NanoXD:
  

  Engine	Volume of NanoXD	Total Lubricant
  2 Cyl.	8 OZ / 250ml	2 to 3 Quarts  / 2 – 3 Liters
  4 Cyl.	12 OZ / 380ml	4 Quarts / 4 Liters
  6 Cyl.	16 OZ / 500ml	5 to 6 Quarts  / 5 – 6 Liters
  8 Cyl.	24 OZ / 750ml	6 to 8 Quarts / 6 – 8 Liters
  10 Cyl.	32 OZ / 1 Liter	9 to 12 Quarts / 9 – 12 Liters
  12 Cyl.	1 Gallon / 4 Liters	35 to 40 Quarts / 35 to 40  liters

• What is NanoCarbon Oil?

  • 100% Pure Oil: No additives, only hydrocarbons and carbon in various molecular state (e.g., Ethyl, Ethylene)
  • Compatibility: Based on advanced API Group IV and V oil grade, it can blend and enhance any lubricant oil
  • Undetectable: Dissolves completely in the engine
  • No Viscosity Impact: Maintains lubricant efficiency

Warning:

• Do not use in engines treated with Molybdenum-based lubricant oils
• Not recommended for CVT transmissions

What is NanoCarbon Oil?

• 100% Pure Oil: No additives, only hydrocarbons and carbon in various molecular state (e.g., Ethyl, Ethylene)
• Compatibility: Mixes seamlessly with any lubricant oil
• Undetectable: Dissolves completely in the engine
• No Viscosity Impact: Maintains lubricant efficiency

Benefits:

• Reduce Friction & Vibrations
• Lower Fuel Consumption
• Enhance Engine Performance
• Increase Torque
• Reduce Carbon Emissions

Download the complete product description PDF here

$15.00 Original price was: $15.00.$14.10Current price is: $14.10.Add to cart

Secure payments processed and verified by PayPal, accepting payments with Visa, MasterCard, Discover, and American Express cards.

Application Instructions:

Initial Application:

1. Remove the filler cap.
2. Pour NanoXD oil, using 10% of your vehicle’s oil capacity.
3. Fill the remaining 90% with your preferred lubricant.
4. For immediate benefits:
   • Start the engine.
   • Gradually increase RPM over 5 minutes to 75% of max RPM.
   • Hold 75% max RPM for 10 seconds.
   • Gradually decrease RPM, holding at 50% and 30% for 10 seconds each.
   • Let the engine idle for 1 minute.
5. Drive for 20 miles to complete the treatment.

Note: Reaching 75% of max RPM is crucial for activating the product benefits.

Future Applications:

• Apply every 4 oil changes or every 60,000 miles.
• NanoCarbon particles form a protective layer on engine parts, lasting through several oil changes.
• For commercial vehicles, perform the treatment while parked if possible.

Achieve Results Fast:

• Save 8% to 20% on fuel consumption
• Up to $2,000 savings in 4 years (for vehicles driving 15,000+ miles/year)
• Reduce engine wear by up to 90%
• Extend engine life by 5 to 10 years

Environmental Impact:

• Reduce your carbon footprint and fuel costs.
• Each purchase of at least 3 bottles supports WeForest projects, planting up to 7 trees and reducing nearly 1 ton of CO2 over five years.

“Drivers on long trips have reported 8% to 20% lower fuel consumption with improvements in both used and new vehicles, including gasoline and diesel engines.”    (see results)